Metro DIY | Timetable | 简体中文
| News | About Us |Operations Overview | Customer Service | Station Environment | Facilities | Metro Management | Metro Culture |
Enter the Gate
 
In front of the gate are two lights. The lightening of green arrow indicates of the equipment in service. The lightening of red ban indicates of the equipment out of service.
 
 
Passengers can carry goods under weight of 20 kilograms, within volume of 0.15 cubic meters, and the sum of length, width and height are less than 1.8 meters.
 
Passengers should take the responsibility of maintaining the ticket clean, Any consequences from folding or pollution will be taken by passengers.
 
When encounter the ticket/card problems, please don’t strike the machine. The best solution is to ask the serviceman near the exit gate for help.
 
Enter/exit gate follows the “right hand” principal.
  1. That means : hold the ticket by right hand. Put the ticket/card above the “Read/Write” area (round stool) for 2 seconds to allow the gate check the validity of the ticket/card.
  2. When the validity check ends, the panel will display values in the ticket/card (except the souvenir ticket, which will display “please go” in Chinese)
  3. Passengers can across the gate along the tri-stick rotation.
 
 
Metro Diy
1. Entrance
2. Fare tickets
3. Enter the Gate
4. Waiting the train
5. Getting on the train
6. Getting off
7. Exit
8. Leave
| News | About Us | Operations Overview | Customer Service | Station Environment | Facilities | Metro Management | Metro Culture |
Copyright © 2006 SHMETRO Inc. All Rights Reserved.
Design by : erp110.com